These are items we don’t currently have in the building, however they're usually available from one of our many distributors. Please contact us here for an exact delivery date, usually 2-3 days.
Available on backorder
TONESTAR 2600 is an ARP® 2600-inspired synth voice 31 years in the shaping, pre-patched like Pearlman’s prodigy, and fully #OutsToOuts modular, allowing for highpass/bandpass/notch filter tones, and bristling X-mod effects. Connect CV / gate and twist ‘n’ switch, or pull its tones and voltages apart one 3.5mm cord at a time. 26 knobs, 7 switches, and 21 jacks make for complex and satisfying signal flow, color and collisions. If it gets reedy, route the triangle wave ’round the VCF, and keep it boomin’.
FREQUENCY – Oscillator frequency attenuator.
PULSE WIDTH – Variable pulse wave width control.
OCT – +1/-1 octave switch.
LFO (^) – Triangle wave low frequency oscillation to pulse width control.
FREQ/PW – Oscillator frequency, or Pulse (square wave) width to ADSR modulation routing switch. Center off.
GLIDE – Slew generator control.
MOD (ADSR) – Oscillation modulation via ADSR control. \
TRIANGLE*/NO VCF – Triangle to VCA switch—bypasses VCF.
SAWTOOTH* – Sawtooth wave attenuator.
SQUARE* – Square wave attenuator.
SUB – Square wave Sub Oscillator attenuator.
TRIANGLE* – Waveform output.
SAWTOOTH* – Waveform output.
SQUARE* – Waveform output.
MIX – Composite waveform output.
1V/O – One volt per octave control voltage input.
TUNE – Master fine tune (approx. -5/+ 5 semitones).
MOD IN – Modulation CV input. Normaled to ADSR; ADSR is replaced when alt. source connected.
NOISE – White noise generator output.
LEVEL – Noise attenuator.
FREQUENCY Frequency, or cut-off attenuator
RESONANCE – Resonance, or Q attenuator.
TRACK – Keyboard/voltage tracking attenuator.
DRIVE – Oscillator output to filter input attenuator.
FREQ/RESO – Filter Frequency, or Resonance to LFO modulation routing switch. Center off position.
ADSR – Filter to ADSR envelope attenuator.
MOD (LFO) – Filter to LFO attenuator.
EXT IN – External audio input.
FIL OUT – Filter audio output.
MOD IN – Frequency or Resonance modulation CV input.
TRIANGLE/SQUARE* – Waveform select switch (triangle core).
DPTH (OSC) – LFO to Oscillator control.
SPEED – Speed or rate attenuator.
DEPTH – Control voltage Input.
TRIANGLE* – Triangle wave output.
SQUARE*– Square wave output.
SPEED – Speed or rate CV input.
ATTACK – Attack stage control.
DECAY – Decay stage control.
SUSTAIN – Sustain stage control.
RELEASE – Release stage control.
DRONE/MASTER – Indefinite/instant sustain, and master mode for ADSR routing switch: fuses VCF envelope with VCA envelope. Center off.
ATTACK – Attack stage control
RELEASE – Release stage control.
MOD IN – Allows for dynamic modulation of the ADSR, eg., if you want the amount of modulation added to/determined by a external source, jack in; or if you prefer, modulation input to the ADSR routing—use with velocity, or a sequencer: the sequencer could isolate the ADSR amount the amount to a single step in the phrase for example. Exciting. A second external envelope can provide an interesting effect, or the AR (in the box patching).
ADSR OUT – ADSR output.
AR OUT – AR Output.
FEEDBACK – Oscillator/filter feedback loop control.
VOLUME – Master volume control.
VCA CV – Amplifier control voltage output.
IN/MIX – VCA mix input switch switch (normalled jack). When set to IN, external audio replaces filter output to VCA; when set to mix MIX, filter output is fed along with the filter audio to VCA.
VCA IN – Audio input.
OUTPUT – Main output.
PCB Mounting Scheme - Through-hole.
Filter - Discrete, voltage controlled, 24/db/oct cascaded transconductance low-pass filter, employing six pairs of hand-matched transistors.
Size - 32hp.
Depth - 35mm including connectors.
Power Usage - 130mA, 80mA (+12 / -12)
All in stock items will be shipped within 1 working day of your order. All in stock orders received before 2pm will be processed same day and shipped for delivery the next working day.
All orders will normally be shipped via DPD tracked and signed delivery.
International orders will be shipped via standard tracked airmail, usually with DPD or UPS.
Elevator Sound is not responsible for any international shipping delays, customs charges or taxes along with any lost, stolen or damaged items.
Customers must notify us at firstname.lastname@example.org of any defects or problems with the product within 48 hours of receiving.
All returns/exchanges will be granted no later than 7 days from when your shipment is received.
All return items must be in original condition with original packaging. The customer is responsible for all shipping charges.
All returns will be refunded to the account payment was received from.
No refund allowed for any products after 7 days.
No refund/exchange on sales items.
Please see our Terms and Conditions for a full rundown of Elevator Sound clauses.
on U.K orders
Price Match Guarantee
We want to bring you the most competitive prices available out there on all the products we sell. However, we understand from time to time you may find a lower price out there.
Our Price Match ensures that if you find an in-stock lower price than what we are advertising on an identical product, we will try to beat, or at least match the price from any other Authorized UK reseller.