switch to the E.U site >
Two 104 hp rows (6U) of Eurorack module space.
One 104 hp row for our 1U modules.
Threaded M3 strips for mounting modules.
Features new TPS80MAX power supply capable of powering up to 20 modules with +12 V output at 3000 mA, -12 V output at 3000 mA and +5 V output at 1500 mA
Construction:
- Solid plastic carrying handle.
- Detachable nylon carrying strap.
- Anodized aluminum lid with latches, deep enough to close the case with cables patched in.
- Retractable feet that can support the case at two different angles. Or lay the case flat on a table.
- Plastic feet for resting the case on the table.
- Rubber feet on bottom side of lid so the case can stand vertically with the lid attached.
- Spring-loaded latching accessory slots on top and bottom of the case. The slots can be used to attach two cases together and for the carrying strap.
- Rear panel:
- Four 1/4? audio jacks that can be connected to the Audio I/O 1U. Two ins and two outs.
- MIDI In, Out, and Thru jacks. The In jack can be connected to the µMIDI 1U and will pass to the Thru. The Out is for future expansion.
- USB port that connects to the µMIDI 1U and other future modules.
- Rocker switch and barrel plug for power entry.
- Max. internal depth for modules: 70 mm
Internal depth for modules above the highest point of the power bus board: 53 mm - Outside dimensions with lid: 312 mm x 165 mm x 546 mm
- Outside dimensions without lid: 312 mm x 83 mm x 546 mm
- Weight: 2.7 kg with lid, 3.0 kg with lid and power adapter*
- Power: TPS80WMAX +12 V output at 3000 mA, -12 V output at 3000 mA, +5 V output at 1500 mA